Size Suggestion

• We offer 2 different lines of shoes (TOTO & CALDEN), please convert your US/UK sizes to the CALDEN/TOTO sizes accordingly.

• Use the sizes of your country / region to convert to the sizes of brand you are buying.

  • For example, a person who wear size 8 in US will need size 7.5 for CALDEN shoes and size 7 for TOTO shoes.

  • The sizes chart recommendation is from our years of experience, however we cannot guarantee a perfect fit for all time.

  • US 11 to 12 would be our largest size in selection and it covers most people under 6 fts tall.

Step by step guide to measuring your feet:

Step 1: Gather your supplies
Step 2: Tracing your foot to find your shoe size
Step 3: Mark the length and width of your foot
Step 4: Measure the length of your foot
Step 5: Finding the final shoe size

Step 1: Gather your supplies All you need to get your proper foot measurement at home is: • a piece of paper larger than your foot • a pencil • tape • and a ruler or measuring tape Tape the paper down to the floor. back to top
Step 2: Tracing your foot to find your shoe size • Sit with your foot firmly on the floor, and your leg bent slightly forward so that your shin is slightly in front of your ankle. • Trace the outline of your foot and remember to measure your foot without shoes, but with socks similar to the ones you'll be wearing with the shoes you are buying. • Hold the pencil or pen upright and perpendicular to the paper. Do not hold it at an angle. • Make sure the pencil is resting snugly against your foot as you draw around it. • You may actually find it helpful to have someone else trace your foot, but as you can see in this image, it can be done alone. back to top
Step 3: Mark the length and width of your foot Use your pencil to draw straight lines touching the outermost points at the top, bottom, and both sides of the outline. back to top
Step 4: Measure the length of your foot Use your ruler or measuring tape to measure the length from the bottom line to the top line that you drew in step three. Be sure to hold the measuring tape straight, and find the closest mark that you can (for inches, use the closest 16th mark) - don't round up or down dramatically. Write this number down. back to top
Step 5: Finding the final shoe size top Repeat these steps for your other foot, and use the larger of the two. After you have your numbers written down, you'll want to subtract 0.2 inch (0.5 cm) from the numbers. This is to accommodate for the slight space between your actual foot and the line made by the pencil. As a remark to this section, we recommend that you select the same shoe size than you generally wear. Our shoes are produced slightly bigger than the standard size range, however, most styles contain extra insoles in a plastic bag that you can use in case the shoes are a little bit too large. As a small note, it is our experience that return customers generally select the same shoe size again, so you shouldn't worry too much about ordering the wrong shoe size. And if the shoes don't fit, you still have the right to return them and have them exchanged for free! These final numbers are your actual foot measurements. back to top